Lug Terminal Hammer Crimp Tool

$ 12.00

4.7 (227) In stock

Heavy duty quality hammer crimp tool for making your own professional cables. Get all of your cable and connectors in one place at Missouri Wind and Solar.
Lug Terminal Hammer Crimp ToolThis simple, inexpensive crimping tool can be used to crimp connectors, lugs, terminals, splicers, on #8 (3.264 mm, 8.37 mm2) through #4/0 AWG (11.684 mm, 107 mm2) wire. Spring loaded pin locks in up position for loading connector and cable. When released, the pin holds the connector securely during crimping. Use with a hammer or vice.Though not quite as easy as the professional production crimpers for large lugs, this crimper is also about $300 cheaper.8 AWG - 4/0 Crimp Tool - use with hammer or vise. Use this crimp tool to make professional connections using our wind turbine cable and terminals. Use with all crimp terminal lugs, including heavy cast lugs.Features:Lugs and splicers are secured by spring tension during installationCapable of using on a full variety of lugs and splicersWide base for stability while swedgingProvides 1400-1800 pounds pull-out resistanceEasy to read scale for proper swedging or just hammer until the crimp feels solid, usually 1 to 2 strikes. Watch our Tutorial on How to Make Your Own Professional Quality Cables

Hammer Style Cable Lug Crimping Tool - Shark Industries

Terminal Ends / Tinned Copper Lugs (2/0 AWG - 8 AWG)

Hammer Crimping Tool – Kwik Wire

K-SPEC CRIMP TOOL CRIMP HAMMER/VISE TYPE 16-4/0GA

EZRED - Hammer Indent Tool (B790C) - Lug Crimping Tool

Inweld LUG CRIMPER TOOL NEW terminal crimping hammer tools welder batt — Welding For Less

Crimpagem Do Terminal De Cabo De Bateria Lug Crimper Tool Ha

ANCOR Heavy-Duty Hex Lug & Terminal Crimper

Compact, Lightweight and Portable Design.

Brute Battery Hammer Crimper Terminal and Lug Crimping Tool 16 AWG - 4/0 AWG

Features:, brand new high quality, Made of high quality material, durable, The cable lug crimping tool is a spring loaded hammer type cable lug

Battery Audio Welding Cables Hammer Crimper Wire Terminal Lug Crimping Tool

Manual Hammer Crimper: recommend 2-4 lb sledge hammer. Also works well in a shop vise. Crimping Type: Indent. Terminal Type: Uninsulated. Wire Gauge

TEMCo Hammer Lug Crimper Tool - Crimps 8 AWG to 4/0 Battery & Welding Cables (Workbench-Mountable)

1pcs Cable Lug Crimping Tool Durable Battery Cable Hammer Crimper Wire Terminal Welding Lugs Crimping Tool 50x52x100mm - Pliers - AliExpress

462 Hammer Style Battery Lug Crimper, 8 to 4/0 AWG

Hammer Lug Crimper Tool for 8 AWG - 0000 AWG Battery and Welding Cables Lug Terminal - AliExpress

Hammer Crimp RV Solar System Parts